Problems and Defects of ERW Steel Pipe

The problems and defects of ERW steel pipes are related to raw materials, production methods, process conditions, equipment status and personnel. Product defects that occur in the production process due to the above factors and restrictions.

This kind of product defects can be roughly divided into two categories: one is product defects, that is, the defects in the product itself are inconsistent with the product standards; the first type of defects generated during the production process does not form the requirements of the product standard items, but is also the product quality The problem, its development trend will inevitably lead to product defects. Therefore, such defects are not allowed in the production process.

Process defects

No burr: burr welds. Outer burr is generally better when the watertight test water pressure. But for Ling, bending, flattening test, weld most cracking.
Peach tip: weld at no glitches, and recessed within the wall, forming the tip shape of peaches, try water pressure when water-tight. But bending, flattening test, weld multiple cracking. Within the burr unilateral: watertight seam burr for the side extrusion test water pressure. Bending, flattening test, sometimes cracking.
Burnt: the outer surface of small pits in the weld, welding sparks a lot of splash, the microstructure observed small holes watertight when the test water pressure, bending, flattening test, most will not crack, but the impact on the intensity of use and life expectancy.

Weld defects

Opening: straight weld plate edge face melting traces or melting traces without welding, crack two tip along the weld direction, expansion, penetrate the inner surface of the test water pressure, leaking.
Crack: micro-crack crack; the outer surface of the visible appearance of fine lines, the inner surface of intact, no leakage in the test water pressure, but when crushed or cold-formed crack.

Lap welding: two edge dislocation in the welding, scraping, except burrs can still see the obvious one side higher and exceed the wall thickness of the negative deviation.

Surface defects

Scratch: the general was the axis of the straight channels and scratches, deeper than the wall thickness of the negative deviation of scrap defects in the weld on both sides of a continuous nail-shaped scratch. Super wall thickness of the negative deviation. Waste big flaw.
Correction hurt: the leveler spiral crushed obviously feel more than the wall thickness of the negative bias of – waste defect.
Pockmarked face: the tube surface successful piece punctate small pits with a diameter of about 1mm.

Warp: the pipe surface warping the separation of the part and the metal substrate into pieces, not continuous, spalling can not afford.

Twitter Tips For Direct Sellers

As a target marketing specialist for direct sales reps, I spend a lot of time testing new strategies to help direct sales reps reach and serve their customers. My current favorite is twitter.Twitter is an obvious choice for connecting real time with friends or followers. It’s quick and relatively easy to navigate. Simply create an i.d., and start looking for people to spread your message.The trouble comes when a person is brand new and has no idea how/where to begin.Twitter is not a platform for heavy selling. Rather, it’s a great place to introduce yourself, share more about who you are, and then open the door to potential business ventures. Heck, you only have 140 characters per tweet, and if you want people to share those tweets, you need to keep it under 120!In the interests of etiquette, here are a few simple tips to help direct sellers make the most of twitter:1. Be genuine. This is at the heart of everything twitter represents. Select a user name that reflects who you are, rather than your product or company name. In fact, most companies prohibit use of their name in that manner anyway, so why risk it?People will gravitate to who you are first, THEN to what you offer.2. Provide value. You’ve heard me say this time and again. People are always asking themselves, “why should I believe/listen you?” We are deluged with thousands of “advertising” messaged every single day. Your tweets need to stand out, provide value to your market and serve the very people you’re trying to reach.3. Be personal. By that, I mean resist the temptation to automate your following/unfollowing or direct messaging.There are appropriate ways to use automation with twitter. I’ve tested dozens of applications that were developed to maximize the efficiency of twitter. My results conclude that autofollows and autoDM’s just cause trouble.Take the time to make the connection manually – which will avoid the need to unfollow at a later date. Yes, it means your number of followers may grow more slowly, but you can be sure that the followers you do have are actually INTERESTED in what you have to say.4. Be patient. If you’re being true to who you are, you’re not likely to get a million followers overnight, but you WILL generate a following of people that know like and trust you.  Word will spread as your followers share your message with their followers.This is why I stress that social media and online marketing does not replace your home party business, but is an additional marketing component to running your business like a real business. Yes, there are people who have all but retired from doing home parties, but it didn’t happen overnight.Don’t fool yourself into thinking that a twitter account (or any single marketing strategy) is the fastest way to riches. It can help increase your reach dramatically, but it’s certainly not an overnight solution.==========© 2009 Lisa Robbin Young.

Make Easy Money Online As an Affiliate Using SEO Marketing

If you have ever looked into SEO marketing (search engine optimisation) then you may have thought to yourself that there is a lot involved and a lot to learn in order to get good results. If you follow a few simple rules then you can cut out the learning curve and get started right away.

Its a fact that with this simple guide, you can make easy money online as an affiliate with strategic SEO marketing. Below i have outlined the steps you must take in order to gain first page rankings within Google, which will send targeted traffic to any offer you are currently promoting. I will also give you a simple method that sends the traffic directly to the offer.

First off, i would like to say that targeted traffic is the life blood of any affiliate campaign. Without lots of targeted traffic, you will not get the results you expect from the hours of hard work you put in. I can tell you that you do not have to spend hours in front of the computer to get results.

Finding A Market To Target

I always start off any campaign by visiting the ClickBank marketplace or any other affiliate or CPA network that i am a member of. If you use ClickBank then look at offers that have a high gravity as this means that there are lots of other affiliates promoting the offer.

Don’t look at competition as a threat, when you see lots of competition, the chances are that there’s a lot of money to be made, or the other people promoting it would not waste their time otherwise.

- For the purpose of this article, i will choose the “Make Money Online” market. So i have been over to the ClickBank marketplace and have seen that “Miracle Traffic Bot” has the best gravity. This is a type of software that would increase traffic so its on a popular subject.

Finding Your Keywords

Once you have found a market that you wish to target, its time to find the keywords. I use the Google keyword tool as this gives you a great idea of whats popular within the market. Your SEO marketing depends on these kind of tools to find the best words to target.

Choose two keywords that have a high monthly search volume so you know that there’s enough traffic to convert into sales. Ideally you would target a keyword with at least 5,000 monthly searches. When you have two of these keywords, you can move on to the next stage.

- As an example for this article, i have visited the keyword tool to find keywords for the product i picked from the “finding a market” section shown above and i would choose “increase targeted traffic” and “targeted website traffic”. These are the two keywords that you want to rank on the first page of results within Google.

The Method You Can Use

As you are using SEO marketing to advertise your affiliate program, you would need to use a strong domain in order to gain the best rankings. If you use a new domain then Google will not take much notice of your site for a long, long time, so its easier to use a popular domain that has a high authority within Google such as HubPages, EzineArticles or Squidoo.

For the purpose of this article i will say that I’m going to use EzineArticles to gain first page rankings for the keywords i have picked.

When i write my article, i must make sure that my keywords are visible within the title, the summary and within the body of my article to make it as relevant as possible for ranking purposes. I usually place each keyword in my article “once” every “100″ words.

TIP: For my keywords picked above i can merge them together which is ideal, so my title could be
“Increase Your Targeted Website Traffic Using Automated Software”. This allows me to then increase my rankings for the keywords chosen as well as making the article nice to read.

Write a good, 500 word article that is related to the offer you are promoting, making sure that you explain the issues surrounding this subject and then a brief outline of how people can overcome the issue. Don’t write the article in a way that would advertise what you are promoting or your article may be rejected. The resource box is used to recommend a product related to the article.

Direct Linking Approach

I have used direct linking a lot in the past and have had great results. All you have to do is register a domain that is related to the product you are promoting. Use the forwarding feature within your domain control panel to redirect any visitors to your affiliate link provided by Google.

You can then include this link within the resource box of your article which is the section you can use to advertise the cure to the issues you raise within your article.

This method is ideal for newbies who cannot yet create landing pages. I would personally always use my own simple landing page that would capture the name and email address before sending the visitor to the offer as i can then sell other related products later on. The direct linking approach is not for everyone but if you cannot make a landing page then you can use this method to break down this barrier and make sales.

Increasing Your Rankings

In order to increase the rankings for your keywords, you must build relevant backlinks to the web address of your EzineArticles page. You must use anchor text which include your keywords with a link to your article. The more backlinks you build, the higher your rankings will become.

Write a few articles per day and link back to your main article within the resource box. Use many different article directories and accounts on Squidoo, HubPages, Wetpaint, Zimbio, Weebly, Blogger and WordPress to build quality links to your main ezine article.

I hope you have enjoyed reading this article as it explains how you can make easy money online as an affiliate using SEO marketing. Get stuck in and take action or you will never make money online.